Service Company

Low Frequency GFRP Imaging with Variable Aperture TFM

P016 Thumbnail.png

15th June 2023

Technical Papers

Composite Inspection Benefits and Challenges Using Ultrasonic NDT Solutions

P017 Thumbnail.png

15th June 2023

Ultrasonic Non-Destructive Testing (NDT) is widely used by engineers to inspect a range of composite materials including aluminium laminates and carbon fiber-based composites.

Technical Papers

Advanced Composite Inspection

SO15_RSflite_Application_Photo_68.png

12th June 2023

A complete picture of a large component can be produced by stitching C-scans together in the UTmap software.

Solutions

Build Your Expertise With Confidence

Veo3 Live TFM Multiple FMC Sources.png

17th June 2021

In the past decade, there have been few revolutions in the world of advance ultrasonic technologies; the latest is the introduction of Total Focusing Method (TFM).

Technical Papers

TFMi™: Using Intermodal Analysis to Improve TFM Imaging

Veo3 TFMi Thumbnail.png

17th June 2021

Total Focussing Method (TFM) is a term given to the mathematical processing of waveforms
collected by a phased array data acquisition process to provide an image of a volume under
inspection.

Technical Papers