Solutions
Phased Array Technique for Inspection of Contact Point Corrosion

3rd May 2022
The PA-CAT™ phased array technique developed by Holloway NDT & Engineering Inc. is an attenuation-based modelling algorithm used to evaluate the minimum remaining wall thickness at pipe or vessel supports.
Solutions
Inspection of Nozzles using the Veo3 and Scannner

7th October 2020
Traditional UT inspection is time consuming, creating a scan plan and then performing the scan using multiple transducers. When using the Veo3 and Nozzle Scan the set ups can all be done offsite, thereby substantially reducing and easing site work.
Solutions
Linear Scanning with the Glider

23rd April 2020
The RSflite workflow is designed for composite inspections.
Solutions
Advanced Composite Inspection

23rd April 2020
A complete picture of a large component can be produced by stitching C-scans together in the UTmap software.
Solutions
Thickness Logging Compliant with AlphaGage+

27th March 2020
Wear rates can be calculated and used to estimate when the minimum allowable thickness will remain with the AlphaGage+
Solutions