Aerospace

TFMi™ Inspection for monitoring "Blind" Holes

A026_Figure 3_ Weak signal.png

21st February 2023

Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.

Application Notes

Phased Array Bolt Inspection, Encoded and Freehand

10th November 2021

Bolts are used in every industry over multiple applications from holding storage vessels and structures to the ground to connecting high pressure pipework and holding wind turbine blades in place.

Application Notes

Wide thickness range using delay line probes

Thickness Thumbnail.png

10th November 2021

Aircraft manufacturers have very demanding specifications when it comes to non-destructively measuring the wall thickness of aircraft parts.

Application Notes

Composite Inspection Benefits and Challenges Using Ultrasonic NDT Solutions

WP2 workflow.png

1st May 2020

Ultrasonic Non-Destructive Testing (NDT) has helped engineers inspect all sorts of composite materials for years.

Technical Papers

Sensitivity Response of Total Focusing Method (TFM) for Weld Inspection Versus Other Methods

P009 TFM

1st May 2020

Total Focusing Method (TFM) is an ultrasonic-based technique enhanced with the post-processing algorithm.

Technical Papers