Manufacturing Non-Destructive Testing
Use our manufacturing non-destructive testing resources for fast and simple inspection methods. We can provide you the tools to help evaluate the properties of any material, component, structure, or system.
Every material and construction is encountered in the manufacturing industry making it one of the most interesting.
Riser Bolt Inspection with Creo Bolt Scanner
Sonatest performed Phased Array Ultrasonic Testing on one Riser Bolt. A TFM scan was also implemented to increase resolution and flaw fidelity. The…
TFMi™ Inspection for monitoring "Blind" Holes
Blind hole inspection is an excellent fit for TFMi™. It really enables a full comprehensive profile view of the internal geometry of a part.
Phased Array Bolt Inspection, Encoded and Freehand
Bolts are used in every industry over multiple applications from holding storage vessels and structures to the ground to connecting high pressure…
Build Your Expertise With Confidence
In the past decade, there have been few revolutions in the world of advance ultrasonic technologies; the latest is the introduction of Total Focusing…
Manufacturing Testing Products
Stix - Long Seam Weld Scanner
The STIX - Long Seam WELD scanner is specially designed to translate Phased Array and/or TOFD probes along both sides of a pipe longitudinal seam…
STIX - Upgradable Weld Scanner
Upgradable solution to scan circular pipe welds using TOFD, Phased Array or combined techniques at your fingertips!
The Odi-II is used to provide encoded position of two probes along the scan axis and its small size makes it a perfect tool for manual TOFD scanning.
The Odi encoder is used to provide encoded position of a probe along the scan axis/ The small size of the Odi makes it a perfect tool for hard to…
The ROTIX - Chain Weld Scanner kit is designed to provide encoded position of probes circumferentially around piping for weld inspection on ferrous or…