Power Generation

Low Frequency PA Inspection

16th March 2020

The inspection of heavy composites thicker than 50 mm (2 inches) causes significant limitations for conventional phased array probes.

Solutions

Low Frequency PAUT Inspection of GFRP

16th March 2020

Certain heterogeneous materials can be highly attenuative to ultrasound. As a result, lower frequency probes are required, especially for thick sections which otherwise can be difficult to inspect.

Application Notes

Austenitic Stainless Steel Solution DAAH – Dual Linear Array Probe

13th February 2020

300 series stainless steels are the most common sub-group of austenitic steels and are used in a large variety of processes and industries, typically for corrosion resistance of high temperature service. Comprehensive inspection techniques are vital to ensure safe operation.

Application Notes

Long Seam Weld Inspection – Manual

22nd January 2020

This package is specifically created for a quick and easy solution to manually inspect Long Seam Welds.

Solutions

Comparison of Corrosion Mapping Solutions using Phased Array and Conventional UT Techniques

15th January 2020

There are many kinds of corrosion inspection solutions and choosing the right one may be complex.

Technical Papers