Long Seam Weld Inspection – Manual

This package is specifically created for a quick and easy solution to manually inspect Long Seam Welds.


 

This package is specifically created for a quick and easy solution to manually inspect Long Seam Welds. An all-in-one embedded feature that only requires a single Phased Array platform (VEO3) without the need for additional software tools. The main advantage of the setup is the reliability and repeatability of data acquisition, that is supplemented with a comprehensive user interface for easier visualisation of the curved surfaces. Ultimately simple to use but effective features significantly improve the characterisation of flaws.

Veo3 Long Seam Inspection


Recommended Package

Category

Part Number

Description

Product

VEO3 32:64PR BNC
Or
VEO3 32:64PR LEMO

VEO3 32:64PR / 2UT:PR Kit BNC
or
VEO3 32:64PR / 2UT:PR Kit LEMO

Instrument Options

SW-VEO3PA32

SW-VEO3PACSC

Upgrade to 32 pulsers/receivers

SW Option: Phased Array Curved Surface Correction

Probes

D1A-002 (2x) or X2B-001 (2x) D1A-5M32E-0.8x12 or X2B-5M32E-0.6x10

Wedges

D1AW-009 (2x) or X2BW-007 (2x) for each COD: 4'', 6'', 8'', 12'', 16'', 24'' and 38'' D1AW-N57S-IHC or X2BW-N60S-IHC

Cable

D1-CABLE-004

D1-CABLE-D-QX5 (5 metre cable)

Encoder

Jireh

  • JX-1004

Phoenix

  • • PX-C-Clamp

Jireh

  • Single Universal Encoder 2.5m

 

  • Compact Universal Encoder

 
Frequency recommendations according to the thickness (T)

35 mm < Thickness < 65 mm = 2.25 MHz

15 mm < Thickness < 45 mm = 5 MHz

6 mm < Thickness < 18 mm = 7.5 MHz models or (D1A-003, D1S-002 or X2B-004)

Thickness < 6mm = 10 MHz (D1S-004 or X2B-008)

For further information, please contact the Sonatest Sales Team: sales@sonatest.com