Skip to content
  • Solutions

Manual Phased Array Corrosion Investigation using a Prisma

This package is an affordable and easy-to-use solution to assess the remaining wall thickness of tubes, pipes, and vessels. In time-based mode and with an encoder, Prisma has both B-scan and C-scan capability. Both tools improve the detection of thickness variations and pitting spots.

Prisma features all the corrosion visualization tools required to produce a comprehensive report. The unit comes with UTstudio+ software that helps users carry out further analysis such as defect measurement and include annotation. This manual phased-array solution improves inspection coverage and ensures that any corrosion and erosion progression is properly assessed.

Fig. 1 - the PRISMA showing a corrosion mapping layout

Fig. 2 - X3A probe and wedge, contoured for pipeline inspection

Frequency recommendations according to the thickness (T):

T < 5mm = 10MHz
5mm < T < 75mm = 5MHz
75mm > T = 2.25MHz


Recommended Tool Package

CategoryPart#Description
Acquisition UnitPRISMA UT BNC KIT OR PRISMA UT LEMO KITPrisma UT BNC Standard Kit OR Prisma UT LEMO Standard Kit
Product optionPRISMA 16:64 TOFDPrisma software 16:64 PA (up to 16 focused elements over 64 arrays)
ProbeX3A-003 OR D5A-001 Note: X3 probe at 5 MHz shall be considered as the default oneX3A-5M64E-0.6x10-SQX2.5
WedgesX3AW-001 Note: X3 wedges shall be considered as the default onesX3AW-0L25-IHC in AOD range of: 4", 6", 8", 12", 16" and 24" and flat.

Please contact our Applications Team if you have any questions. You can also find more solutions on our website.

To follow further content and our newsletter, please contact us and check “Add to mailing list”.

Related Products