X6B
Low Frequency Linear Scan
Large Footprint Low Frequency
Overview
Common applications:
- Aerospace parts (large and thick composite)
- Large aluminium plates (delaminations)
- Wind mill spar caps
- Steel and aluminium castings
Features
- Quick I-PEX Connector (QX)
- Quick I-Pex Bracket
- 2.5m Cable (other cable lengths upon request)
- Armoured Cable on request
- Hard Faced Option on request
Specification
X6B Transducers
| Product Code | Transducer Description | Frequency | Number of Elements | Elevation | Element Pitch | Aperture | External Dimensions | ||
|---|---|---|---|---|---|---|---|---|---|
| F (MHz) | Qty | E (mm) | P (mm) | L (mm) | Length (mm) | Width (mm) | Height (mm) | ||
| X6B-005 | X6B-0.5M64E-2x10-SQX5 | 0.5 | 64 | 10 | 2 | 128 | 137 | 26 | 28 |
| X6B-006 | X6B-1M64E-2x10-SQX5 | 1 | 64 | 10 | 2 | 128 | 137 | 26 | 28 |
X6B Wedges
Wedge Materials
NOTE: all wedge dimensions listed below are made with Rexolite, high temperature materials will require consultation on the most suitable wedge and probe solution for your inspection requirements, below are listed common materials used in our wedges
| Material | Max Service Temp (ºC) | Max Service Temp (ºF) | Compression Velocity at 5MHz (mm/µs) | Wedge Types (Angled / Flat) |
|---|---|---|---|---|
| Rexolite | 60 | 140 | 2.33 | Both |
| Torlon | 260 | 500 | 2.71 | Both |
| Vespel | 300 | 572 | 2.51 | Flat |
Wedge List
| Product Code | Wedge Description | Wave Type | Nominal Refracted Angle in Steel | Recommended Sweep (in steel) | Delay Line Length | Wedge Dimensions | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LW/SW | (º) | Min (º) | Max (º) | (mm) | Cut Angle (º) | Length (mm) | Width (mm) | IHC Width (mm) | Front Height H1 (mm) | Back Height H2 (mm) | ||
| X6BW-001 | X6BW-0L30-IHC | L | 0 | -20 | 20 | 30 | 0 | 153 | N/A | 28 | 30 | 30 |
| X6BW-002 | X6BW-0L60-IHC | L | 0 | -20 | 20 | 60 | 0 | 153 | N/A | 28 | 60 | 60 |
| X6BHG-001 | X6BHG-0L HydroGlider | L | 0 | -20 | 20 | Water Column | 0 | 150 | 38 | N/A | 17.2 | 17.2 |