X5
Deep Penetration

Overview

Common applications:

• Structural component (large pins)
• Shaft inspection
• Casting, bars & billets
• Critical large weld inspection

 Request more info

---

[BACK TO TOP]

---

Features

• Quick I-PEX Connector (QX)
• Quick I-Pex Bracket
• 2.5m Cable (other cable lengths upon request)
• Armoured Cable on request 
• Hard Faced Option on request

---

[BACK TO TOP]

---

Specification

X5 Transducers

Product Code	Transducer Description	Frequency	Number of Elements	Elevation	Element Pitch	Aperture	External Dimensions
		F (MHz)	Qty	E (mm)	P (mm)	L (mm)	Length (mm)	Width (mm)	Height (mm)
X5A-001	X5A-2.25M16E-1x16-SQX2.5	2.25	16	16	1	16	23	45	20
X5A-002	X5A-5M16E-1x16-SQX2.5	5	16	16	1	16	23	45	20
X5A-003	X5A-2.25M16EHF-1x16-SQX2.5	2.25	16 (Hard-Face)	16	1	16	23	45	20
X5A-004	X5A-5M16EHF-1x16-SQX2.5	5	16 (Hard-Face)	16	1	16	23	45	20

X5 Wedges

Wedge Materials

NOTE: all wedge dimensions listed below are made with Rexolite, high temperature materials will require consultation on the most suitable wedge and probe solution for your inspection requirements, below are listed common materials used in our wedges

Material	Max Service Temp (ºC)	Max Service Temp (ºF)	Compression Velocity at 5MHz (mm/µs)	Wedge Types (Angled / Flat)
Rexolite	60	140	2.33	Both
Torlon	260	500	2.71	Both
Vespel	300	572	2.51	Flat

Wedge List

Product Code	Wedge Description	Wave Type	Nominal Refracted Angle in Steel	Recommended Sweep (in steel)		Delay Line Length	Wedge Dimensions
		LW/SW	(º)	Min (º)	Max (º)	(mm)	Cut Angle (º)	Length (mm)	Width (mm)	IHC Width (mm)	Front Height H1 (mm)	Back Height H2 (mm)
X5AW-001	X5AW-0L40	L	0	-20	20	40	0	38	38	N/A	40	40
X5AW-002	X5AW-N60S	S	60	45	75	0	39	45	38	N/A	30.2	13.6
X5AW-003	X5AW-N60L	L	60	30	75	0	20	45	38	N/A	33	21
X5AW-004	X5AW-0L40-IHC	L	0	-20	20	40	0	38	N/A	52	40	40
X5AW-005	X5AW-N60S-IHC	S	60	45	75	0	39	45	N/A	49	30.2	13.6
X5AW-006	X5AW-N60L-IHC	L	60	30	75	0	20	45	N/A	49	33	21

---

[BACK TO TOP]

---