Multi-frequency Inspection of a graphite/epoxy laminate composite with variable thickness
27th March 2020
Focusing on the analysis of composite material C-scans acquired at various frequencies. Using the proper analysis software makes it possible to assemble all the C-scans to create images which represent the part inspected.
Manual Phased Array Corrosion Investigation using a Prisma
26th March 2020
An easy-to-use solution to assess the remaining wall thickness of tubes, pipes and vessels.
Roller Probe Inspection
17th March 2020
The through transmission inspection technique is a widely accepted method for honeycomb assessments.
Low Frequency PA Inspection
16th March 2020
The inspection of heavy composites thicker than 50 mm (2 inches) causes significant limitations for conventional phased array probes.
Austenitic Stainless Steel Solution DAAH – Dual Linear Array Probe
13th February 2020
300 series stainless steels are the most common sub-group of austenitic steels and are used in a large variety of processes and industries, typically for corrosion resistance of high temperature service. Comprehensive inspection techniques are vital to ensure safe operation.