Small Welded Bore Pipe – Single Sided Inspection

The Bracelet Scanner is designed specifically for circumferential welds in small bore pipework.


 

The Bracelet Scanner is designed specifically for circumferential welds in small bore pipework. This manually operated belt type scanner is the ultimate scanning aid for phased array inspection of circumferential welds from 0.5” to 6” (12mm to 150mm). It is extremely simple to set up and its low-profile design makes it the perfect tool to use in areas with limited access. The Bracelet Scanner is commonly supplied as a single sided configuration making it suitable for pipe-to-fitting inspection.

Small Welded Bore Pipe – Single Sided Inspection


Recommended Package

Category

Part Number

Description

Product

PRISMA UT BNC KIT

or

PRISMA UT LEMO KIT

Prisma UT BNC Standard Kit 

or

Prisma UT LEMO Standard Kit

Product option

SW-PRISMA-PA16

Prisma Software 16:16 PA

Probes

X0A-003

X0A-7.5M16EFC35-0.5x10-SQX5 (Low profile probes)

Wedges

Wedges are included with the scanner kit

Wedge AOD: 0.5'', 0.75'', 1'', 1.25'', 1.5'', 2'', 2.5'', 3'', 3.5'', 4'' and flat.

Scanner

PX-BRA-S-0.5'' TO 6''

Single Small Bore Pipe Scanner with irrigation kit included

Pump

JX-CMA013

JX-1003 ( Irrigation tube)

Portable Manual Couplant Pump - 2 gallons 

 
For faster data acquisition, VEO+ is recommended.

Frequency recommendations according to the thickness (T):

2.25 MHz  T>30 mm
5 MHz 15 mm<T<30 mm
7.5 MHz 4 mm<T<15 mm
10 MHz  T<4mm

For further information, please contact the Sonatest Sales Team: sales@sonatest.com